5228 CAMBRIK SET (CORSAGE)

 

FABRIC: LIGHT SILK OR COTTON.

 

YOU WILL ALSO NEED: cambric; elastic tape; decorative tape; 6 buttons.

Elastic shirring thread.

 

 

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

 

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric pieces).

 

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE MATCHING!

 

CUTTING:

Fabric:

1. Shoulder strap – 2 pieces

2. Lath – 2 folded pieces

3. Back – 2 pieces

4. Side front – 2 pieces

5. Centre front – 2 pieces

6. Side cup – 2 pieces

7. Centre cup – 2 pieces

 

INSTRUCTIONS:

1. Cut the centre front pieces with each edge for 5 cm bigger then the

pattern is. Place the elastic shirring thread on the garment. Zigzag stitch

over the elastic on the wrong side, pull up the elastic to gather the fabric.

Knot securely. Cut the centre front pieces according to the pattern.

 

2. Stitch the side/centre front pieces together.

 

3. Stitch the side/centre cup edges. Topstitch the seams. Stitch the cups to the front. Fold the cup top edges to the wrong side folding the raw edge under and topstitch them. Fold the hem seam allowance to the wrong side and stitch it.

 

4. Stitch the laths to the centre front. Fold the laths in half lengthways inside out and stitch the short edges. Turn them right side out, fold the raw edge inside and topstitch to the garment through the previously made seam. Topstitch the laths. Make buttonholes in the right one. Attach the buttons to the left.

 

6. Make up the shoulder straps, topstitch them and stitch to the front top edge, try the corsage on checking the length of the straps. Fix the straps to the back.