FABRIC: light silk or cotton material (cambric).
YOU WILL ALSO NEED: elastic
tape.
IF THE PATTERNS HAVE DOUBLE
CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR,
THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
MATCHING!
CUTTING:
Fabric:
1.Half
of the trousers – 2 pieces
INSTRUCTIONS:
1. Stitch the side/inside
leg seams and press them open.
2. Put one half of the
trousers inside the other one right sides together and stitch the central seam
leaving a slit in the seam above the waist fashion line.
3. Fold the waist integrated facing to the wrong side and topstitch it to
the garment. Make two rows of stitches
according to the marks. Cut 3 piece
of elastic to fit the waist, plus 2,5
cm. Thread these pieces of elastic
through the casing. Overlap and stitch the elastic ends.
4. Fold the lower trousers
edges under and topstitch them.