FABRIC: LINGERIE
YOU WILL ALSO NEED: lingerie elastic.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE
SEAM ALLOWANCE IS PROVIDED.
IF THE PATTERNS HAVE SINGLE
CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric pieces).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
MATCHING!
ADVICE: to prevent seam from stiffing, sew details
with special (zigzag) stitch. To prevent hem from stiffing neaten it with overlocker and then stitch using double needle. Do the same
for all edges must stay elastic.
The above is not for industrial
manufacturing.
CUTTING:
Fabric:
1. Back - 2 pieces
2.
Front - 2 pieces
INSTRUCTIONS:
1. Stitch the side/inside leg seams. Press
the seams open.
2. With right sides together place one half of
the pants inside other half and stitch the crotch seam leaving a slit above the
fold marks (for the waist elastic).
3. Fold the waist self facing to the wrong
side; fold the raw edge under
and topstitch 0,1 cm above the foldline. Cut a piece of elastic to fit the waist, plus 2,5
cm. Thread the elastic through the casing. Overlap and
stitch the elastic ends.
4.
Stitch the elastic with zigzag stitch to the leg openings stretching it
slightly and placing it 0,2 cm out of the marks. Fold
the seam allowances to the wrong side of the garment and topstitch them with
zigzag (stretching it slightly).