5275 SPORTS JACKET FOR WOMEN

YOU NEED: jersey; fusing; 1 separable zipper (depending on front part’s length); elastic cord for the hood; 2 caps for cord.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams, 2.5 cm for garment/sleeve hems and hood’s edge.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Front part – 2 pieces

2. Back part – 1 piece

3. Sleeve – 2 pieces

4. Side part – 2 pieces

5. Hood – 2 pieces

6. Hood center part – 1 piece

7. Front band – 2 pieces

8. Sacking – 4 pieces

9. Off-set welt – 2 pieces

ADVICE: to prevent seam from stiffing, sew details with special (zig zag) stitch. To prevent hem from stiffing neaten it with overlock and then stitch using double needle. Do the same for all edges which must stay elastic.

The above is not for industrial manufacturing.

INSTRUCTIONS:

1. Apply the fusing to wrong side of off-set welt and press the welt along the center. Fold sackings right sides together, insert the welt between them and stitch the edge of pocket entrance. Turn sackings right side out and press them.

2. Lay ready patch pocket on side part in accordance with marking. Stitch side part to front part inserting patch pocket with the welt. Topstitch joining seam. Stitch shoulder edges together. Stitch side seams. Stitch sleeves. Stitch sleeves into armholes. Stitch hood details together. Neaten buttonholes into the hood according to marks. Fold the allowance under and topstitch it along hood’s front edge. Stitch the hood into neckline.

3. Lay the zipper on edging right sides together (teeth are from edging). Overstitch edging with front bands inserting the zipper. Overstitch the neckline with facing and topstitch it along shoulder seam.

4. Press garment/sleeve hems under and topstitch hems.

5. Press ready jacket.

6. Pull the cord into the hood.