MATERIAL: silk and viscose.
YOU NEED: hidden separable zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE
IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Front part
yoke – 1 detail
2. Back part
yoke – 1 detail
3. Front part - 1 detail
4. Back part - 1 detail
5. Waistband – 2 details
Cut pipings of 0.5 cm width
by diagonal.
INSTRUCTIONS:
1. Gather front and back
upper parts.
2. Fold pipings for
front part yoke neckline, back part yoke and straps along the center and press.
Sew folded pipings to edges of front part yoke
neckline, back part yoke and yoke side edges; piping bent should be on the
garment on 0.75 cm width. Cut seam allowances to 0.5 cm width. Turn a piping into
wrong side, then topstitch along necklines, yoke side seams and straps.
3. Sew yokes to front and back parts.
4. Oversew front/back
parts upper edges alongside with yokes.
5. Topstitch oversewn
edges on the front and back parts.
6. Sew right side seam.
7. Press left sides of front and back parts
into wrong sides and sew the zipper.
8. Gather front and back
parts hem.
9. Sew the waistband to the
blouse hem. Face waistband ends and topstitch the waistband along the joining
seam.