5332 HIP TROUSERS WITHOUT WAISTBAND

YOU NEED: light stretch fabric – natural or mixed, iron-on interfacing; 1 zipper; 1 button.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCE: 1 cm for all seams, 3 cm for hem.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric pieces).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE MATCHING!

CUTTING:

Fabric:

1. Front – 2 pieces

2. Back – 2 pieces

3. Back facing – 1 folded piece

4. Front facing – 2 pieces

5. Zip guard – 1 piece

Interfacing: front facing, back facing, zip guard.

INSTRUCTIONS:

1. Apply the interfacing to the wrong side of the facings and the zip guard.

2. Stitch darts. Press them towards the center.

3. Neaten the edges and stitch the side/inside leg seams.

Press them open.

4. Stitch the crotch seam up to the closure mark.

5. Press the closure fly extensions to the wrong side. Stitch the zip

tape edges to the slit left edge and to the right fly extension. Fold

the zip guard inside out and overstitch along two short sides. Turn it right side out. Neaten the long edge. Topstitch the left fly extension

to the guard. Topstitch the slit right edge close to the foldline

catching the extensions.

6. Join the front and back neck facing across the shoulder seams.

Press the seams open. Neaten the raw edge. Overstitch the garment top

edge with the facing. Slipstitch the ends of the facing to the zip tape. Topstitch the waistline. Press the hems under. Stitch them in place.

8. Make buttonhole in the right front edge, apply the button to the left front edge.