YOU NEED: natural fabric
suitable for blouse, fusing, zipper.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 3 cm for hems.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back part – 2 pieces
2. Back facing – 2 pieces
3. Front part – 1 piece
4. Front facing
– 1 piece
5. Sleeve – 2
pieces
Fusing: front/back facing.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of front/back facing.
2. Stitch bust darts and press them downwards. Stitch back darts and
press them towards back center. Stitch waist darts and press them towards back
center.
3. Neaten back middle edge. Stitch back middle seam up
to closure notch. Stitch the zipper in.
4. Neaten shoulder/side
edges. Stitch shoulder seams and press them apart. Stitch side seams up to slit
notch and press them apart. Press slits. Make decorative stitch along slits
at 0.5 cm from slit
edges.
5. Stitch sleeve seams and
neaten them. Press seams. Stitch sleeves into armholes.
6. Stitch shoulder edges of
front/back facings. Neaten facings’ inner edges.
7. Lay facings on the
garment right sides together and overstitch edges of front/back facings.
Topstitch overstitching allowance of front/back necklines on overstitching at
0.2 cm from overstitching seam. Stop stitching 3 cm before middle seam. Stitch
facing’s middle allowance to zipper allowances. Press front/back necklines. Fix
front/back neckline facing along shoulder seam with 1 cm stitch to garment’s
shoulder seams.
8. Neaten garment hem and
sleeve hems, press them into wrong side and topstitch hems.
Our advice: if you
wish, you can sew
beads to front neckline and sleeve hems.