YOU NEED: natural/mixed fabric, satin ribbon, zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for shoulder
seams and garment hem.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Upper back part – 2 pieces
2. Back skirt – 2 pieces
3. Front yoke – 1 piece
4. Middle front part – 1 piece
5. Front skirt – 1 piece
INSTRUCTIONS:
Our advice: specify shoulder seams during fitting.
1. Stitch bust darts into
yoke and press darts downwards.
2. Stitch
front yoke to middle front yoke. Neaten joining seam and press it towards the
yoke. Topstitch satin ribbon on front part and front skirt (according to technical
sketch).
3. Stitch
front part to front skirt. Neaten joining seam and press frontward.
4. Stitch
upper back part to back skirt. Neaten joining seam and press it backward.
5.
Topstitch satin ribbon on the seam joining back skirt and upper back part.
Topstitch satin ribbon on the seam joining front skirt and front part.
Topstitch the ribbon on upper back part between the mark and
décolleté lower edge (in accordance with technical sketch).
6. Stitch
side/shoulder edges. Neaten side/shoulder seams, pres them backwards.
7. Neaten
edges of front/back neckline, front/back armholes, back
décolleté. Press allowances into wrong side (do not stretch them)
and topstitch at 0.5 cm from edge.
8. Neaten
middle back edge. Stitch middle seam up to closure notch, and press it apart
pressing closure slits. Stitch
the zipper in.
9. Neaten
dress hem, fold it under and topstitch at 1.5 cm from lower edge. Tie decorative bows at front part.