YOU NEED: natural/mixed fabric, zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Right center back part – 1 piece
2. Left center back part – 1 piece
3. Right side back part – 1 piece
4. Left side back part – 1 piece
5. Right side front part – 1 piece
6. Right center front part – 1 piece
7. Left center front part – 1 piece
8. Left side front part – 1 piece
9. Gusset – 4 pieces
10. Flounce of gusset – 4 pieces
11. Upper flounce_1 – 1 piece
12. Upper flounce_2 – 1 piece
INSTRUCTIONS:
1. Neaten lower edges of
flounces, gussets and dress details with roll stitches.
2. Adjust
side edges of the gusset and flounce of russet and tack them together.
3. Stitch
the gusset to right center front part, neaten joining seam 4 cm above the
notch. Stitch middle front edge and gusset side edge. Press middle front seam
pressing the gusset. Remove
tacking.
4. Stitch
front/back relieve edges. Neaten front/back relieve seams, press front seams
towards front center, press back seams towards back center.
5. Stitch
the gusset to left center back part, neaten joining seam. Neaten middle edge of
left center back part with the gusset and middle edge of right center back
part. Stitch middle back edge to gusset side edge up to closure notch. Press
middle back edge apart, press slits. Remove tacking. Stitch the zipper in.
6. Stitch
the gusset to side back part, neaten joining sea 4 cm above notch. Stitch side
seam and gusset side edge. Remove tacking. Press dress side seams.
7. Neaten
shoulder seam of the dress, stitch it and pres it apart.
8. Cut shoulder strap. Fold the strap along the center wrong side out
and make a stitch at 0.5 cm from fold. Turn the strap right side out and press.
Sew the strap to front neckline.
9. Try the
dress, adjust strap length and sew back end on back part.
10. Stitch
side edge of upper flounce and neaten it. Overstitch the edge of neckline and
armhole with the flounce. Neaten overstitching seam and topstitch on the dress
at 0.2 cm from overstitching.