YOU NEED: natural/mixed
fabrics; chiffon; concealed zip; piping; fusing.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 1 cm for hem.
NB! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Center front part – 1 piece
2. Side back part – 2 pieces
3. Center back
part – 2 pieces
4. Side front part – 2 pieces
5. Sleeve facing – 2 pieces
Chiffon:
1. Back sleeve – 2 pieces
2. Front sleeve – 2 pieces
Cut a piping of 4 cm width.
INSTRUCTIONS:
1. Stitch front/back vertical relieves and neaten them.
Press front relieves toward front center, press back relieves toward back
center.
2. Stitch sleeve seams and
neaten them.
3. Stitch side seams and
neaten them. Press side seams backwards.
4. Stitch
sleeves into armholes.
5. Neaten middle back seam. Stitch middle back seam up
to the closure notch. Press middle back seam and closure slit edges.
6.
Overstitch the neckline with the piping. Fix piping ends by hand.
7. Neaten dress hem, fold it under and topstitch.
8. Press sleeve facing along the center. Apply the fusing to wrong side
of sleeve facing so that the fusing was 1 cm beyond bending line.
9. Stitch facings as a ring. Neaten the seam and press it apart.
10. Stitch facing’s doubled side to hem sleeve. Neaten the seam and
press it toward the facing. Fold facing’s open edge under by 1 cm and topstitch
along joining seam.