YOU NEED: sheer natural/mixed fabric; concealed zip; fusing; 1 button; piping.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 0 cm for armholes, 1.5 cm for the hem, 1 cm for
other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Center back part – 2 pieces
2. Side back part – 2 pieces
3. Center front part – 1 piece
4. Side front part – 2 pieces
5. Collar – 2 pieces
Fusing:
1. Collar – 1 piece
INSTRUCTIONS:
1. Apply
the fusing to wrong side of the collar.
2. Stitch front/back
relieves. Neaten the seams and press them toward centers.
3. Stitch side seams.
Neaten the seams and press them backward.
4. Neaten
middle back edge. Stitch middle back seam up to the closure notch. Press middle
seam apart, press closure slit. Stitch the zipper in.
5. Press the piping along the center and
overstitch armholes.
6. Lay collars together.
Overstitch inner collar with outer one, cut allowances and turn the collar
right side out. Press the collar pressing lower edges.
7. Stitch the collar to
front/back parts coinciding notches.
8. Neaten the hem and topstitch at 1.5
cm.
9. Make a loop into the collar and sew
the button.