YOU NEED: natural/mixed fabric;
lining.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Upper back part – 2 pieces
2. Lower back part – 2 pieces
3. Upper front part – 2 pieces
4. Lower front part – 2 pieces
Lining:
1. Upper back part – 2 pieces
2. Lower back part – 2 pieces
3. Upper front part – 2 pieces
4. Lower front part – 2 pieces
Our advice: you can use the fabric as the lining.
INSTRUCTIONS:
1. Stitch upper front darts
and press them upward.
2. Stitch upper front part
to lower front part. Neaten seams and press them upward.
3. Stitch
lining front parts.
4. Lay
upper back part on the lining right sides together and overstitch along center
edge. Overstitch details along upper/lower edges stopping 1 cm before the
central seam. Turn the detail right side out and press them. Make decorative
stitch along center seam at 1 cm from the edge.
5. Do the
same for lower back part.
6. Stitch
upper/lower back parts to front part along side seam. Neaten the seams and
press them frontward.
7. Cut a strap. Fold the strap along the center wrong side out and make
a stitch at 0.5 cm from bending. Turn the strap right side out and press it.
Sew the strap to front neckline.
8. Fold the strap into right side as well
as upper/lower back parts. Lay front par on the lining right sides together and
overstitch along three edges: begin at lower front corner, along side seam and
along upper edge. Slash the seam, turn details right side out and pres them.
9. Fold the rest hole’s edges under and press. Make decorative stitch along
upper/lower edges stitching unstitched segment at the same time.
10. Pull the strap through
back parts as on the sketch.