YOU NEED: chiffon; lining; concealed zip.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 2 pieces
2. Front part – 1 piece
3. Draped front part – 2 pieces
4. Placket – 2 pieces
Lining:
1. Back part – 2 pieces
2. Front part – 1 piece
Our advise: you can use the fabric as the lining.
INSTRUCTIONS:
1. Stitch darts into
fabric/lining front/back parts. Press upper front darts upward, press waist
darts toward the center.
2. Turn in
draped front part’s upper/lower edges.
3. Stitch
draped front parts along middle edge. Neaten the seam and press it sideward.
4.
Overstitch the placket along side edges. Turn the placket right side out and
press it.
5. Stitch
the placket to front neckline along marked line in the middle of placket. Fold
placket’s end upward and stitch placket’s two raw edges to armholes and to side
seam at 0.5 cm from the edge.
6. Neaten
middle back edge. Stitch middle back seam up to the closure notch. Press middle
back seam apart pressing clit edges, then stitch the zipper in.
7. Stitch
lining middle back seam up to the closure notch. Press middle seam apart
pressing slit edges.
8. Stitch
front/back shoulder edges as well as lining shoulder edges. Neaten seams and
press them backward.
9. Lay fabric details on lining ones and coincide necklines. Fold the lining at 5 mm before zipper’s edges and
pin to top’s upper edge. Fold allowances along the zipper into right side and
pin them to upper edge above the lining. Overstitch back part’s upper edges.
Fold closure allowances into wrong side. Fold the lining upward and topstitch
on back part on seam allowance at 1-2 mm from the seam. Fold the lining into
wrong side and fix to zipper braid.
10. Stitch fabric/lining side seams. Neaten seams and
press them backward.
11. Overstitch armholes into times. Slash the seam,
turn it out and press.
12. Neaten
fabric/lining hems, fold them into wrong side, press and topstitch.