YOU NEED: sheer natural/mixed fabric: piping: 2 buttons:
fusing.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 0 cm form armholes/back upper edge/front edging, 1.5
cm for the hem, 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150
cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Center back part – 2 pieces
2. Side back part – 2 pieces
3. Center front part – 4 pieces
4. Side front part – 2 pieces
INSTRUCTIONS:
1. Apply the fusing to wrong side of segment of
buttonholes/buttons.
2. Overstitch center front parts along lower edges.
Turn the details right side out and press them. After doing
this, process the detail as one-layer.
3. Stitch
front/back relieves. Neaten and press them toward centers.
4. Stitch
side edges together. Neaten the seams and press them backward.
5. Stitch
middle back edges together. Neaten the seam and press it sidewise.
6. Press the piping along
the center and overstitch upper back part/armholes.
7. Overstitch front edgings
with the piping. Overstitch the edge between the hem and upper part making a 40
cm tie of the piping. Fix the piping at the hem.
8. Neaten
the hem, fold it under and topstitch at 1.5 cm from lower edge.
9. Make
buttonholes into right front edging, sew buttons to left one.