YOU NEED: middle/high stretchable jersey (natural or mixed).
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1.5 cm for the hem, 1 cm for other
seams.
ATTENTION! Before sewing, print paper patterns and lays them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 piece
2. Front part – 1 piece
3. Placket – 1 piece
OUR ADVICE: stitch jersey details with
special elastic/zig-zag stitches. If you use an overlock, cut seam allowances
till 0.6-0.8 cm width. Topstitch hem allowances with double needle to save
elasticity.
INSTRUCTIONS:
1. Stitch side front/side back edges. Neaten the seams
and press them backward.
2. Neaten the hem and armhole edge. Fold them into
wrong side, press and topstitch them.
3. Stitch the placket forming a ring. Press the
placket along the center right side out.
4. Stitch outer placket to back/front parts coinciding
notches. Fold inner placket’s allowances into wrong side and topstitch along
the seam.
4. Neaten facing’s outer/inner edges. Fold facing’s
side edges into wrong side at 0.7 cm width. Lay the facing on the front part
right sides together and overstitch along inner edge. Fold the facing into
wrong side, insert the ring between the front part and the facing, and then
topstitch.
5. Fold the strap along the center wrong side out. Overstitch
its’ long edge. Turn the strap right side out and press it. Neaten open edges
together. Pull straps one edge through the ring and fix it on wrong side. Cross
straps on the back, adjust the length and sew the straps to back upper edge.