5664

YOU NEED: middle/high stretchable jersey (natural or mixed).

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCES: 1.5 cm for the hem/sleeve hems, 1 cm for other seams.

ATTENTION! Before sewing, print paper patterns and lays them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Back part – 1 piece

2. Front part – 1 piece

3. Sleeve – 2 pieces

OUR ADVICE: stitch jersey details with special elastic/zig-zag stitches. If you use an overlock, cut seam allowances till 0.6-0.8 cm width. Topstitch hem allowances with double needle to save elasticity.

INSTRUCTIONS:

1. Stitch shoulder front/back edges. Neaten seams and press them backwards. Slash the allowances into front/back armhole at notch. Neaten armhole upper segment, fold it in and topstitch.

2. Neaten sleeve cap’s straight edge. Fold it under and topstitch.

3. Stitch side front/side back edges. Neaten seams and press them backwards.

4. Stitch sleeve seams. Neaten seams and press them.

5. Stitch the sleeve into armhole coinciding notches. Neaten seams and press them.

6. Neaten the hem/sleeve hem/neckline. Press them into wrong side and topstitch.