YOU NEED:
double-side middle/high
stretchable jersey (natural or mixed).
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 0 cm for the hem and the neckline,
1.5 cm for sleeve hems, 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lays them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Back part – 1 piece
2. Front part – 1 piece
3. Sleeve – 2 pieces
OUR ADVICE: stitch jersey details with
special elastic/zig-zag stitches. If you use an overlock, cut seam allowances
till 0.6-0.8 cm width. Topstitch hem allowances with double needle to save
elasticity.
INSTRUCTIONS:
1. Stitch right shoulder/side edges of front/back
parts. Neaten seams and press them backwards.
2. Neaten the neckline and the hem with narrow zigzag
stitch.
3. Make 1 wrap on front part and stitch left shoulder
edge o left side edge. Neaten the seams and press them backwards.
4. Stitch sleeve seams. Neaten seams and press them.
5. Stitch sleeves into armholes coinciding notches.
Neaten seams and press them.
6. Neaten sleeve hems. Press sleeve hems into wrong
side and topstitch.