You need: soft
natural/mixed fabric; lining, fusing. 1 button.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCES: 1 cm for
all seams. 3 cm for garment/sleeve hems.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Back part 1
piece
2. Right front part
1 piece
3. Left front part
1 piece
4. Gusset 2 pieces
5. Back neckline
facing 1 piece
6. Collar 2 pieces
Lining:
1. Back part 1
piece
2. Right front part
1 piece
3. Left front part
1 piece
4. Gusset 2 pieces
Fusing:
one-piece front bands of front/back parts, back neckline facing, collar.
NB: when
cutting lining front/back pieces, do not take into account front
bands/back neckline facing widths correspondingly.
INSTRUCTIONS:
1. Apply the fusing
to wrong side of one-piece front bands of front/back parts, back neckline
facing and collar.
2. Stitch sleeve
upper edges. Press seam allowances apart.
3. Lay collars right
sides together and overstitch along outer contour as well as short edges. Slash
rounded allowances, cut corners. Turn the collar right side out, then press it.
Tack the collar into
the neckline between right front edging and left front parts middle line.
4. Stitch the gusset
to back part. Press seam allowances apart. Stitch the gusset to front part.
Press seam allowances apart.
5. Press one-piece
front bands into wrong side of front parts. Stitch shoulder edges of front
bands and facings. Press seam allowances apart.
Lay front bands on the
garment right sides together and overstitch the neckline stitching the collar.
Stitch lining pieces
together leaving a hole into sleeve right front seam (to turn the garment right
side out). Press seam allowances.
Stitch the lining to front
bands and back neckline facing. Overstitch lower corner. Slash rounded
allowances, cut corners.
Mark garment/sleeve
hems and press them into wrong side. Overstitch garment/sleeve hems with the
lining.
Turn the garment
right side out, press it.
Sew technological hole.
6. Make b buttonhole into
right front part, sew a button to the left one.