You need:
wool/mixed wool; fusing, lining, 4 buttons.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM
ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 3 cm
for the hem. 1 cm for other seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Front part – 2
pieces
2. Back part – 2
pieces
3. Collar – 2 pieces
4. Front band – 2
pieces
5. Back neckline
facing – 1 piece
Lining:
1. Back part – 2
pieces
2. Front part – 2
pieces
Fusing:
1. Front band – 2
pieces
2. Back neckline
facing – 1 piece
NB: when
cutting lining front/back pieces, do not take into account front
bands/back neckline facing widths correspondingly.
INSTRUCTIONS:
1. Apply the fusing
to wrong side of front bands and back neckline facing.
2. Stitch middle back
seam. Neaten the seam and pres it leftward.
3. Stitch shoulder
edges. Neaten seams and press them backwards.
4. Lay collars right
sides together. Overstitch collar ends and collar fall; begin and finish at the
line of collar stitching. Turn the collar right side out and press it.
5. Lay front band on
front part right sides together, then overstitch along front edging.
Overstitching goes at front part, between the hem and the notch pointing the
end of collar joining. Cut seams into front edging’s upper corners. Turn front
edgings into right side.
6. Stitch shoulder
edges of back neckline facing and front band. Press seam allowances apart.
7. Insert the collar
between the poncho, front band and the facing. Stitch outer collar into poncho
neckline, stitch inner collar into front bands/facing necklines. Press seam
allowances apart. Fold front bands and facing into wrong side, then stitch
collar joining seam allowances close to seams.
8. Stitch lining
pieces leaving a 15-20 cm length segment in one of seams (to turn the garment
right side out). Lay the lining on the poncho right sides together and stitch
the lining to front bands’ inner edges and to back neckline facing. Overstitch
front edgings’ lower corner. Cut seams of front edging’s lower corner.
11. Press the hem
into wrong side. Slash hem allowance where it is rounded. Stitch the lining to
garment hem. Turn the poncho right side out and press it. Stitch the hole in
the seam. Make decorative stitch parallel to front edging line (as marked). Sew
buttons.