5771 TUNIC

YOU NEED: natural/mixed fabric (cotton, viscose, polyether); piping.

IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,

IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.

SEAM ALLOWANCES: 1.5 cm for the hem, 0 cm for front/back necklines, 1 cm for other seams.

ATTENTION! Before sewing, print paper patterns and lay them out according to the linen width (from 90 to 150 cm) to find out how much material you need (do not forget about double and symmetric details).

WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!

CUTTING:

Fabric:

1. Back part – 1 piece

2. Front part – 1 piece

3. Back sleeve – 2 pieces

4. Front sleeve – 2 pieces

INSTRUCTIONS:

1. Stitch front darts. Press darts upward. Stitch back darts. Press darts toward back center.

2. Trim front/back vertical stitches between side mark and the hem: fold allowances into wrong side twice, then topstitch.

3. Stitch side seams between armholes and notches. Stitch right shoulder seam. Neaten seams and press them backward. Neaten the neckline with the piping. Stitch left shoulder seam. Neaten the seam and press it backward.

4. Stitch sleeve edges between sleeve cap and the notch. Neaten seams and press them apart. Topstitch the segment between the notch and the hem. Stitch sleeve into armholes easing them along sleeve caps.

5. Fold the hem twice and topstitch it.