YOU NEED: cotton velvet of 150 cm width; fusing; 4 buttons.
CUTTING:
Fabric:
1. Back part – 1
folded piece
2. Yoke – 1 folded
piece
3. Front part – 2
pieces
4. Pocket – 2
pieces
5. Front band – 2
pieces
6. Sleeve – 2
pieces
7. Collar – 2
folded pieces
Fusing: collar, front band.
INSTRUCTIONS:
1. Apply the
fusing to wrong side of collar details and front bands.
2. Press patch
pockets allowance to wrong side, fold them under and topstitch. Press pocket
open edges in, lay front part according to lining, then stitch along edge.
3. Sew the yoke to
back part, right sides together, press the seam towards yoke and topstitch.
4. Sew the yoke to
front part, right sides together, press the seam towards yoke and topstitch.
5. Lay front bands
to the garment right sides together and overstitch edgings up to collar mark.
Slash the seam close to mark, turn front bands to wrong side, tack and pres.
6. Lay collar
details one on another, right sides together, and overstitch them along ends and
flying detail, on 1 cm from neckline edges. Turn to right side, tack and press.
Press open edges in, insert neckline between them, and stitch along edge.
7. Sew sleeve
seam, press allowance upward. Sew sleeves into armholes and press allowance
toward the sleeve.
8. Press
garment/sleeve hems to wrong side, fold them under and topstitch. Make
decorative stitch along edging and collar edges.
9. Make
buttonholes into left front part, sew buttons to right one.