YOU NEED: wool or
semi-wool; lining; fusing; zipper; 1 button; metal hook.
CUTTING:
Fabric:
1. Fly front – 1 piece
2. Button catch – 1 piece
3. Side – 2 pieces
8. Back
subpocket – 2 pieces
9. Back pocket
facing – 4 pieces
10. Front part
– 2 pieces
11. Back part –
2 pieces
12. Waistband –
1 piece
13. Belt loop –
1 piece
Lining:
4. Front pocket
lower sacking – 2 pieces
5. Front pocket
upper sacking – 2 pieces
6. Back pocket
lower sacking – 2 pieces
7. Back pocket
upper sacking – 2 pieces
Fusing: waistband,
facing, fly front, button catch.
INSTRUCTIONS:
Apply the fusing to wrong side of waistband, facing,
fly front and button catch.
Coincide
pocket entrance facing and the side their wrong side on front pocket sacking
right side along marking, tack along edges and stitch with close zig zag along
lower contours.
Sew pocket sackings to front and back parts along
marking; then press allowances to sackings. Coincide edges and sew side seams
and pocket contour. Make a decorative stitch along front pocket entrance on
right side. Sew sacking and waistline edge.
Sew back darts and sew them into the center.
Make back slip pockets “in frame”, with two facings.
Fold facing right side out and press along the center. Pin facing (folded to
different directions) on the garment right side along marking. Lay lining
sacking on lower facing; lay fabric sacking on upper facing and stitch on 5 cm
distance along both sides of marking. Cut the fabric along the center between
stitches, with small corner at stitch ends, then turn sacking into wrong side
and make facings of 1 cm. Topstitch facing free edges on sacking. Coincide both
sackings, make them equal and stitch along the contour. Stitch facing ends on
the fabric triangles on the wrong side. Tack sacking edges and waistline edge.
Sew front part middle seam up to closure.
Sew the fly front to left front part. Press the fly
front into garment wrong side. Pin the zipper to closure right edge, put on it
the button catch folded along the center its right side out, coinciding them
along edges; sew all layers. Make the button catch right and make a decorative
stitch along zipper edge. Sew zipper another edge to the fly front. Neaten the
fly front and topstitch it on the garment. Make fixing stitch along lower edges,
from the wrong side.
Sew side and crotch seams. Sew back middle seam.
Overstitch belt loop, turn it right side out, press
and divide into 6 parts.
Pin belt loops on waistline edge according to marks.
Sew the
waistband to garment upper edge. Fold
the waistband along the center and overstitch front short edges. Turn waistband
inner edges under and topstitch along joining seams. Sew belt loops another
ends to waistband upper edge.
Neaten hems, press them under and sew with blind
stitches.
Make a buttonhole into waistband left end and sew the
button on right one.