YOU
NEED: poplin,
fusing, 6 buttons.
CUTTING:
Fabric:
1.
Collar – 2 pieces
2.
Stand-up collar – 2 pieces
3.
Back part – 1 folded piece
4.
Front part – 2 pieces
5.
Back sleeve – 2 pieces
6.
Front sleeve – 2 pieces
Fusing:
edging placket, cuffs, collar and stand-up collar.
INSTRUCTION:
1.
Apply the fusing to wrong side of edging placket, cuffs, collar and stand-up
collar.
2.
Press one-piece front band plackets to right side and overstitch lower edge.
Slash seam allowance perpendicularly to the stitch stopping 1 mm before
stitches. Turn the placket right side out and press.
3.
Stitch darts. Sew side/shoulder seams.
4.
Fold the hem to wrong side, fold it under and topstitch.
5.
Stitch the collar neatly along outer contour. Lay stand-up details right sides
together inserting the collar between upper edges. Stitch the stand-up collar
neatly along front and upper edges. Sew stand-up collar outer detail into
neckline; turn inner one under and topstitch along joining seam. Make a button
at stand-up right end.
6.
Neaten sleeve upper and lower edges as well as tie edges. Sew sleeve lower seam
and upper seam together to notch mark, press allowances apart. Press allowances
of lower edges and tie edges to wrong side and topstitch.
7.
Sew sleeves into armholes. Press allowance of seam joining sleeve (sleeve cap)
towards sleeve.
8.
Make 5 buttonholes into right front part. Sew
buttons
correspondingly.