YOU
NEED:
viscose poplin; fusing; 3 buttons.
CUTTING:
Fabric:
1.
Collar – 2 folded pieces
2.
Back part – 1 folded piece
3.
Lower front part – 1 folded piece
4.
Front yoke – 1 folded piece
5.
Back neckline facing – 1 folded piece
6.
Front facing – 2 pieces
7.
Back sleeve – 2 pieces
8.
Front sleeve – 2 pieces
Fusing:
back neckline facing, outer collar.
INSTRUCTIONS:
1.
Apply the fusing to wrong side of back neckline facing, outer collar. Reinforce
also closure lower segment with fusing.
2.
Press one-piece plackets of front facing to right side and overstitch the
projection which is placket upper segment between bend and marking line. Slash
neckline edge neat stitch end stopping 1 mm before stitch; turn the placket
right side out and press. Lay facings on front part
right sides together and topstitch along long edges. Cut placket allowance and
make triangle slash at its end. Turn plackets to wrong side, adjust them and
reinforce with double stitch along base.
3.
Sew shoulder/side seams to slit marks.
4.
Lay collar details right sides together and topstitch along ends and fly parts.
Turn right side out and press.
5.
Sew shoulder seams of front facings and back neckline. Turn front bands to right
sides, lay it on garment right sides together, insert
the collar and stitch. Turn facing and front band to wrong side and
press.
6.
Sew sleeve lower/upper edges to notch mark. Press allowances apart.
Sew
sleeves
into
armholes.
7.
Press garment/sleeve hem to wrong side, fold them under and topstitch. Topstitch
slit edges at 1 mm from bends.
8.
Make buttonholes into right placket and sew buttons on left
one.