YOU
NEED: fabric
with lycra of 150 cm
width;
fusing; 1 zipper; 1 button; 2 studs.
CUTTING:
Fabric:
1.
Flap – 4 pieces
2.
Pocket – 2 pieces
3.
Front part – 2 pieces
4.
Back part – 2 pieces
5.
Button catch – 1 piece
6.
Waistband – 1 piece
7.
Belt loop – 4 pieces
Fusing:
waistband, button catch, inner flaps.
INSTRUCTIONS:
Apply
the fusing to wrong side of waistband, button catch and inner
flaps.
Press
pocket allowances under, topstitch them on the front
part according to marking. Sew side
seams. Trim
flaps along three sides, turn them right side out, press and topstitch along the
edges. Sew flaps to garment parts according to marks, with its edge to pocket
upper edge. Turn the flap so that it was on the pocket with its inner side. Press, then
topstitch
on 0,7 cm
distance
from
joining
seam.
Fold
front parts right sides together, sew front middle seam stopping 2 cm below
inside leg seam.
Press
zipper closure one-piece facing to wrong side. Sew the zipper under closure
allowance left edge along the edge. Sew zipper free braid to right one-piece
facing. Fold the button catch along the center wrong sides tigether, then neaten along long and short edges.
Topstitch zipper closure one-piece facing onto garment left button catch.
Topstitch right edge catching the facing.
Sew
inside leg seams. Press seam allowances apart. Insert both parts one into
another (right sides together). Sew middle seam upwards upper edge. Press middle
seam allowances towards roundings.
Overstitch
the belt loops along long and one of short edges. Sew the waistband to garment
upper edge, right sides together, leave projecting piece on waistband left end
for closure. When sewing, insert belt loop raw ends between waistband and the
garment.
Press
awistband joining seam allowance to the waistband. Fold the waistband along the
center right side together and sew front ends.
Turn
the waistband right side out, topstitch it on the right
side strictly along joining seam. Topstitch beltloops ready ends on the
waistband.
Press
garment hems under and topstitch.
Make
a buttonhole into waistband right end, sew the button
on the left one. Sew studs.