YOU
NEED: linen;
fusing; 1 zipper; Velcro.
CUTTING:
Fabric:
1.
Pocket facing – 2 pieces
2.
Patch pocket – 2 pieces
3.
Patch pocket flap – 4 pieces
4.
Side front part – 2 pieces
5.
Front sacking – 2 pieces
6.
Upper front part – 2 pieces
7.
Middle front part – 2 pieces
8.
Lower front part – 2 pieces
9.
Button catch – 1 piece
10.
Upper back part – 2 pieces
11.
Middle back part – 2 pieces
12.
Lower back part – 2 pieces
13.
Hem facing – 2 pieces
14.
Waistband right part – 2 pieces
15.
Waistband left part – 2 pieces
Fusing:
waistband details, pocket facing, button catch, pocket
flap.
INSTRUCTIONS:
Apply
the fusing to wrong side of waistband details, buton catch, pocket facings and the flap.
Tack
pocket facings to front parts. Topstitch sackings to pocket entrances right
sides together. Cut sacking joining seam allowances to 0.5-cm width. Turn
sackings into wrong side. Turn lower
edges
under
and
topstitch
them
on
front
parts. Pin
front parts on cut sides, then tack pocket entrance. Sew sackings
together.
Overstitch
flaps along figure edges, then turn into right side, press and topstitch along
edges. Topstitch a piece of Velcro (with hooks) on flaps. Tack flaps on middle
front parts according to marks. Topstitch Velcro soft pieces on pocket details.
Make pleats into pockets, press pocket side allowances into, and topstitch it
along marking on middle front parts of the garment.
Sew
upper front part and middle front part (flap upper edge
enter into joining seam). Press allowances upwards, then topstitch. Sew
middle front part and lower front lower part (insert pocket lower edge into
joining seam). Press allowances downwards.
Sew
front parts right sides together under slit mark along front middle seam, stop sewing 2 cm before inside leg
seam.
Press
zipper closure one-piece facing into wrong side. Sew the zipper under left
closure allowance. Sew zipper free band to right part to one-piece facing. Fold
the button catch along the center its right side out, then neaten along long and
short edges. Topstitch closure one-piece facing onto the zipper on the burron
catch (on garmant left part). Topstitch slit right edge catching
facing.
Sew
upper back part to middle back part. Press allowances upwards, then topstitch.
Sew middle back part to lower part. Press allowances into lower parts, then
topstitch.
Sew
inside leg and side seams. Sew back edge and front edge unsewn part with one
stitch. Press allowances downwards roundings.
Sew
waistband details in pairs, press seams apart. Sew waistband upper edge to
garment upper edge right sides together. Press joining seam allowances to the
waistband. Fold waistband upper and lower parts right sides together, them
overstitch. Turn the waistband right side out, press it, and topstitch strictly
along joining seam on right side. Topstitch hard piece of Velcro (with hooks) on
waistband right end, and soft piece on the left one.
Sew
hem facings into rings, then sew to garment hems right sides together. Turn
facings into wrong sides and press. Topstitch facings on right side along the
joining seam strictly.