YOU
NEED:
artificial suede/leather; lining; 6 studs.
CUTTING:
Fabric:
2.
Flap – 4 pieces
3.
Upper
pocket – 2 pieces
4.
Upper pocket flap – 4 pieces
5.
Back
yoke
– 1 folded
piece
6.
Middle
back part – 2 pieces
7.
Side
back
part
– 2 pieces
8.
Front
yoke
– 2 pieces
9.
Side
front
part
– 2 pieces
10.
Center
front
part
– 2 pieces
11.
Front band – 2 pieces
12.
Collar – 2 pieces
13.
Upper sleeve – 2 pieces
14.
Lower sleeve – 2 pieces
Lining:
1.
Sacking – 4 pieces
15.
Back part – 1 folded piece
16.
Front part – 2 pieces
17.
Upper sleeve – 2 pieces
18.
Lower sleeve – 2 pieces
INSTRUCTIONS:
1.
Stitch middle back seam and relieve back seams. Topstitch
seams
at
2 mm.
2. Stitch back yoke to back part right sides
together. Turn the seam towards the yoke and topstitch at 2
mm.
3.
Stitch center front part to side front part except pocket entrance. Topstitch
seams at 2 mm.
4.
Fold
flaps
pieces
right
sides
together
and
overstitch
along
side
edges
and
lower
edge,
turn
right
side
out
and
topstitch
at
2 mm.
5.
Coincide open edges of lower flap to edge of center front part’s relieve, with
the flap on center front part’s right side and coinciding flap upper edge to
notch. Lay upper sacking on the flap. Lay lower sacking on
side front part’s right side. Stitch the flap and sackings. Fold sackings
into wrong side, adjust the, and stitch together. Topstitch flap’s short edges
on front part along decorative stitch.
6.
Coincide upper flap’s open edges to yoke edge, with flap on front yoke’s right
side. Lay upper sacking on the flap and tack then together. Lay lower sacking on lower front part’s right side. Stitch
the flap and sackings together. Stitch the yoke to front part. Fold sackings
into wrong side, adjust them and stitch. Slash the seam near the pocket. Turn
joining seam towards the yoke and topstitch.
7.
Stitch side/shoulder seam of the jacket. Topstitch the seam at 2
mm.
8.
Lay inner collar on outer one, right sides together, and overstitch them along
ends and collar fall. Turn
the
collar
right
side
out
and
topstitch.
9. Stitch sleeve seams. Stitch sleeves into armholes according to marking. Fold sleeve hems into wrong side.
10.
Stitch lining shoulder/side seams. Stitch lining sleeves’ seams leaving one hole
for turning out. Stitch sleeves into armholes. Stitch front bands to
lining.
11.
Lay the lining on the garment right sides together,
inserting the collar between neckline edges, and overstitch along edgings,
neckline and hem. Turn the garment right side out, fold lining sleeves’ hems
under and sew to garment’s sleeve hems.
12.
Make stud’s upper parts into right front part, make
lower parts into left font part.