YOU
NEED: fabric
suitable for jackets and raincoats; warmer; fusing; lining;
Velcro.
CUTTING:
Fabric:
1.
Back part – 1 folded piece
3.
Off-set welt – 2 pieces
4.
Sacking – 2 pieces
5.
Front part – 2 pieces
7.
Front band – 2 pieces
8.
Collar – 2 pieces
9.
Sleeve – 2 pieces
Lining:
2.
Back part – 1 folded piece
6.
Front part – 2 pieces
10.
Sleeve – 2 pieces
Warmer:
topstitch the warmer on back/front details, sleeves and outer collar along
marking.
INSTRUCTIONS:
1.
Apply
the
fusing
to
wrong
side
of
off-set
welt.
2. Cut
side front slit pockets “in frames”: press welts along the center right side
out. Apply the stripe of fusing of 2 cm width to wrong side of pocket marking.
Lay off-set welt and sacking on front part, right sides together, pin them
together along pocket entrance marking and stitch. Lengthwise edges of facings
coincides to pocket marking middle line! Cut the front part between stitches,
cut the fabric diagonally at stitch ends. Do not cut facings! Press seam facing
allowances apart. Fold facings into wrong side through the slit to make a neat
frame, then tack. Lay sacking on front part’s wrong side, on lower facing (lay
sacking upward); topstitch lower facing on right side along joining seam
catching the sacking. Press sacking downwards. Turn small triangles at slit ends
into wrong side and topstitch accurately between upper stitch ends and lower
stitch ends. Cut sackings, adjust, and stitch them together.
3.
Stitch side/shoulder seams.
4.
Lay outer collar on inner one and overstitch them along ends and flies. Turn the
collar right side out and press it.
5. Stitch sleeve seams. Stitch sleeves into armholes. Press sleeve hems into wrong side.
6. Stitch lining details leaving unstitches segment into one of sleeves. Stitch
front bands to lining. Lay the lining on garment right sides together and
overstitch them along all edges inserting the collar between necklines of lining
and the garment.
Turn the
jacket right side out and stitch unstitches segment. Sew sleeve lining hem to
sleeve hem line neatly.
7. Stitch
Velcro hooked piece on right edge, stitch Velcro napped piece on left
one.