YOU
NEED: denim
with lycra; decorative fabric; fusing; 1 zipper; 1
button.
CUTTING:
Fabric:
2.
Front side part – 2 pieces
3.
Front sacking – 2 pieces
4.
Upper front part – 2 pieces
5.
Button catch – 1 piece
6.
Lower front part – 2 pieces
8.
Back part – 2 pieces
10.
Waistband – 1 piece
11.
Belt loop – 4 pieces
Decorative
fabric:
1.
Figure facing – 2 pieces
7.
Slit facing – 4 pieces
9.
Back yoke – 2 pieces
Fusing:
waistband,
slit facing, buttn catch.
INSTRUCTIONS:
Apply
the fusing to wrong side of waistband, button catch and slit
facing.
Sew
figure facing to front parts (do not forget to neaten their lower edges).
Topstitch sacking on pocket entrances, right sides together. Cut joining seam
allowances to 0.5 cm width. Turn the sacking into wrong side. Topstitch
entrances on 0.75 cm. Pin front parts on cut sides along marking, tack to
entrances up and down. Stitch sacking from wrong side on the one-piece sackings
with sides. Tack cut sides and front parts.
Sew
front upper parts and front lower parts. Press allowances upwards and
topstitch.
Sew
front parts right sides together under slit mark along front middle seam, stop sewing 2 cm before inside leg
seam.
Press
closure one-piece facing into wrong side. Sew the zipper under closure
allowance. Sew zipper free band to right part to one-piece facing. Fold the
button catch along the center its right side out, then neaten along long and
short edges. Topstitch closure one-piece facing onto the zipper on the burron
catch (on garmant left part). Topstitch slit right edge catching
facing.
Sew
inside leg and side seams to notch marking. Sew back edge and unsewn part of
font edge with one stitch. Press
allwances
apart,
downward
roundings.
Sew
belt loops along long and one of short edges.
Sew
the waistband and garment upper edge, right sides together; leave closure
projecting allowance at waistband left end. When sewing, insert belt loop’s raw
ends between the garment and the waistband.
Press
joining seam allowance to the waistband. Fold the waistband its wrong sides out
along the center, then sew short ends. Turn the
waistband right side out, then topstitch strictly along joining seam on the
garment right side. Topstitch belt loops overstitched ends on the
waistband.
Fold
slit facing along the center right sides together, then overstitch one short
edge. Turn facing into right side and press them along the center.
Sew
facings
to
garment
wrong
side
coinciding
edges.
Turn
facings into right side, then topstitch along the marking.
Turn
hem allowances into wrong side, then topstitch.
Make
a buttonhole into waistband tight end, sew the button
on the right one.