YOU
NEED: fabric
suitable for clocks; warmer; Velcro band.
CUTTING:
Fabric:
1.
Back part – 1 folded piece
3.
Off-set welt – 2 pieces
4.
Sacking – 2 pieces
5.
Front part – 2 pieces
7.
Front band – 2 pieces
8.
Collar – 2 pieces
9.
Sleeve – 2 pieces
11.
Hood side – 2 pieces
12.
Hood
center
– 1 piece
Lining:
2.
Back part – 1 folded piece
6.
Front part – 2 pieces
10.
Sleeve – 2 pieces
11.
Hood side – 2 pieces
12.
Hood center – 1 piece
Warmer:
apply the warmer to wrong side of back/front parts, sleeves, outer collar and
hold parts (topstitch them along center).
INSTRUCTIONS:
1.
Apply
the
fusing
to
wrong
side
of
off-set
welt.
2. Make SLIT POCKETS WITH OFF-SET WELT at side
front parts: press off-set welts along the center right side out. Apply 2-cm
stripe of fusing to wrong side of front part above pocket marking. Lay pocket
welt and fabric sacking on front part, right sides together, pin along pocket
entrance marking and stitch (welt lengthwise/sacking edges must coincide with
pocket marking center). Cut front part between stitches, diagonally to stitch
ends. Do not cut welts and sackings! Press seam allowances apart. Turn welts and
sackings to wrong side through a slit, then tack. Lay lower sacking on welt at
front wrong side (turn sacking upwards), and topstitch the welt on joining seam
on right side, catching sacking. Press sacking downwards. Turn small triangles
at slit ends to wrong side and stitch, with welts ends, strictly between upper
stitch ends and lower stitch ends. Cut sacking, adjust and
stitch.
3.
Sew garment side/shoulder seams.
4.
Lay outer collar and inner collar right sides together and overstitch them along
ends and flying part. Turn
the
collar
right
side
out
and
press
it.
5. Sew hood parts. Topstitch the hold along center part.
6. Sew sleeve seams. Sew sleeves into armholes. Press garment/sleeve hems to wrong side.
7. Sew lining details leaving a slit (to turn
the garment right side out) into one of sleeves. Stitch front band to lining.
Lay the lining on the garment and overstitch along all edges inserting the hood
and the collar between lining neckline and garment neckline. Turn the garment
right side out and stitch the slit. Sew lining sleeve hem to fabric hem
allowance neatly.
8.
Topstitch Velcro pieces on right front part; topstitch Velcro on left front
part.