YOU NEED: denim; fusing; zipper;
button.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1.
Waistband – 1 piece
2. Left
front part – 1 piece
3. Right
front part – 1 piece
4. Front yoke – 1 piece
5. Right back part – 1 piece
6. Left back part – 1 piece
7. Back yoke – 1 piece
8. Belt loop – 1 piece
Fusing: waistband.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of waistband.
2. Stitch front yoke to left
front part. Neaten joining seam, press it and make decorative stitch.
3. Stitch right front part
to front panel. Neaten joining seam, press it and make decorative stitch.
4. Stitch back yoke to left
back part. Neaten joining seam, press it and make decorative stitch.
5. Stitch right back part to
back panel. Neaten joining seam, press it and make decorative stitch.
6. Neaten garment side
edges. Stitch side seams leaving closure slit into left side seam as well as
hem slits. Press side seams apart pressing hem slits and closure slit.
7. Fold the belt loop
along the center wrong side out, adjust edges and overstitch it at 0.5-0.7 cm
from edges. Then turn it right side out, placing seam at fold line or making an
edging of 0.1-0.2 cm width into wrong side, and press it.
8. Press the waistband along the center right side out
and neaten waistband lower inner edge. Cut belt loops according to size and
topstitch them on marking on waistband lower edge.
9. Stitch
the zipper into left side seam. Stitch the waistband with belt loops to skirt
upper edge. Overstitch waistband ends, cut corner allowances and turn it right
side out. Topstitch waistband lower neatened edge on joining seam and press
ready waistband. Topstitch belt
loops on waistband.
10. Neaten
garment hem. Press hem allowance into wrong side and topstitch it. Make
decorative stitch along slits 0.5 cm from slit edges.