YOU NEED: denim; fusing; zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Right
front panel – 1 piece
2. Left
front panel – 1 piece
3. Back
panel – 2 pieces
4. Large back flounce – 1
piece
5. Small back flounce – 1
piece
6. Large right front flounce
– 1 piece
7. Small right front flounce
– 1 piece
8. Large left front flounce
– 1 piece
9. Small left front flounce
– 1 piece
10. Front facing – 1 piece
11. Back facing – 2 pieces
Fusing:
front/back facings.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of front/back facings.
2. Neaten middle back edge. Stitch
middle edge leaving closure slit. Stitch the slit in.
3. Neaten all flounces’ lower edges,
pres into wrong side and topstitch them.
4. Lay small back flounce wrong side
on large back right side and fix along upper edge. Stitch flounces to back panel
right sides together. Neaten the seam and press it towards panel. Make
decorative stitch along joining seam.
5. Lay small left front flounce
wrong side on large left front flounce right side and fix them together along
upper edge. Stitch flounces to left front panel right sides together. Neaten
the seam and press it towards panel. Make decorative stitch along joining seam.
6. Lay small right front flounce
wrong side on large right front flounce right side and fix them together along
upper edge. Stitch flounces to right front panel right sides together.
7. Lay left
front panel on right front panel right sides together, folding flounces out,
and stitch them on the seam joining flounces. Neaten the seam and press it
rightwards. Make decorative stitch along joining seam.
8. Neaten side edges of front/back
panels. Stitch garment side seams and press them apart.
9. Stitch facings side edges and
press seams apart. Neaten facing outer edges.
10. Neaten front/back panel upper edge with facing. Topstitch overstitching allowance on facing at 0.2 cm from overstitching. Fold facing side edges under and sew by hand.