YOU NEED: velour/denim; fusing; 1
zipper.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. First
flounce – 1 piece
2. Second
flounce – 1 piece
3. Third
flounce – 1 piece
4. Fourth flounce – 1 piece
5. Waistband – 1 piece
Fusing:
waistband.
INSTRUCTIONS:
1. Apply the fusing to wrong
side of waistband.
2. Make
easy-stitched seam along upper edges of the first, second, third and for the
flounces at 0.5 cm from edges. Pull detail upper edge according to previous
detail’s length lower edge, adjusting pleats along the length.
3. Stitch the first flounce
to the second one. Neaten joining seam and press it. Stitch the third flounce
to the second one. Neaten joining seam and press it. Stitch the force flounce
to the third one. Neaten joining seam and press it.
4. Pres the waistband along
the center right side out and neaten lower inner edge.
5. Neaten garment side
edges. Stitch side seam up to closure notch. Press side seam apart pressing
zipper slit. Stitch the zipper into side seam. Stitch the waistband to skirt
upper edge. Overstitch waistband ends, cut seam allowances in corners and turn
it right side out. Topstitch lower neatened edge of waistband on joining seam
ad press ready waistband.
6. Neaten skirt hem. Press
hem allowance into wrong side and topstitch.