YOU NEED: velour/denim; fusing;
elastic braid; Velcro.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 3 cm for hem, 5 cm
for panel upper edge, 3 cm for panel front edge.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Front
part – 2 pieces
2. Back
part – 2 pieces
3.
Waistband – 1 piece
4. Panel – 1 piece
Fusing:
waistband.
INSTRUCTIONS:
1. Apply the fusing to waistband.
2. Fold
panel upper/middle/lower edges into wrong side and sew them under by hand (with
edge closed).
3. Neaten
front/middle/lower edges, side/inside leg edges of front/back parts. Stitch leg
inside seams and pres them apart. Stitch left side seam and press it apart.
4. Stitch
front edge and back edges. Make another stitch along crotch seam close to seam
joining front seam and back seam.
5. Press the waistband along the center,
right side out, and neaten lower inner edge.
6. Stitch waistband raw edge to panel
upper edge. Cut elastic braid and pull it into waistband back part. Fix elastic
braid along side seams.
7. Lay back part right side edge on panel
side edge and neaten them. Neaten right side edge of shorts front part. Stitch
garment right side seam.
8. Topstitch waistband lower neatened edge
on joining seam and press ready waistband. Press hem allowance into wrong side
and topstitch. Topstitch Velcro on shorts and on panel according to marks.