YOU NEED: cotton
velvet/denim; lining; zipper.
IF THE PATTERNS
HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS
HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE:
1 cm for all seams, 3 cm for hem.
ATTENTION! Before sewing,
print paper patterns and lay them out according to the linen width (from 90 to
150 cm) to find out how much material you need (do not forget about double and
symmetric details).
WHEN SEWING, BE CAREFUL WITH NOTCHES – THEY MUST BE
COINCIDING!
CUTTING:
Fabric:
1. Front part – 1 piece
2. Back part – 2 pieces
3. Upper fringe – 1 piece
4. Lower front – 1 piece
Lining:
5. Front part – 1 piece
6. Back part – 2 pieces
INSTRUCTIONS:
1. Neaten upper/lower
fringes long edges with “over-edge” stitch.
Make easy-stitched seam along fringe center. Pull details to
necessary size placing
pleats along the
length.
2. Mark auxiliary line for
fringes on front part and pin fringes. Topstitch fringes on front part and
remove pins.
3. Neaten garment side
edges. Stitch side seams and press them apart.
4. Neaten back middle edge
and stitch it to closure notch. Press middle back seam apart pressing closure
slit. Sew
the zipper inside.
5. Stitch lining details,
and neaten seams. Pres lining seams backwards. Neaten back middle edge and
stitch upwards closure notch.
6. Overstitch front/back
necklines with lining, folding the fringe out. Overstitch front/back armholes
with lining. Turn the lining into wrong side and press armholes and neckline.
Make decorative stitch along front/back necklines and along armholes at 0.5 cm
from edge.
7. Insert front shoulder
straps into back straps between lining and fabric. Stitch shoulder edges and
pull one out another.
8. Neaten dress hem and lining
hem, fold them under and topstitch. Press dress hem and lining hem.