YOU NEED: stretch cotton velvet/denim;
fusing; 1 zipper; 1 button; decorative fringe; elastic braid.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE
IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 3 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1. Pocket – 2
pieces
2. Upper right
front part – 1 piece
3. Middle right
front part – 1 piece
4. Lower right
front part – 1 piece
5. Upper left front
part – 1 piece
6. Middle left
front part – 1 piece
7. Lower left
front part – 1 piece
8. Back part – 2
pieces
9. Belt loops – 1
piece
10. Waistband – 1
piece
11. Button catch –
1 piece
Fusing: waistband, button catch.
INSTRUCTIONS:
1. Apply the
fusing to wrong side of waistband, button catch.
2. Stitch back
darts. Press darts towards back part center.
3. Stitch front
parts inserting decorative stitch between them. Neaten joining seams and
topstitch them.
4. Press pocket upper edge into wrong side, fold it
under and topstitch. Press pocket allowances into wrong side according to
pattern. Topstitch the pocket on front part and topstitch.
5. Neaten front
/middle edges of garment and garment lower edges. Stitch garment side edges.
Neaten seams and press them. Stitch decorative braid to garment lower edge.
Stitch leg inside seams and neaten them, press seams backwards. Neaten joining
seam and press it. Stitch front edge and middle edge up to closure notch. Make
another stitch along crotch seam close to seam joining front seam and middle
seam.
6. Press closure one-piece facing
into wrong side. Stitch the zipper under closure left allowance. Stitch zipper
free braid to right one-piece facing. Fold button catch along the center
wrong side out and overstitch along two sides. Turn button catch right side out
and press it; them neaten button catch side. Stitch button catch to zipper
closure left allowance. Topstitch slit right edge catching the facing.
7. Fold belt loop along the center wrong side out,
adjust edges and overstitch at 0.5-0.7 cm from edges. Then turn right out,
place the seam along fold line or making an edging of 0.1-0.2 –cm width into
wrong side, and press it.
8. Press the waistband along the enter right side out
and neaten lower inner edge. Cut belt loops according to size and topstitch
them on waistband lower edge.
9. Stitch the waistband to garment upper edge. Cut
elastic braid according to size. Topstitch elastic braid on waistband at side
seams levels between upper belt loop and back one (on both sides). Overstitch
waistband lower end, cut them at corners and turn right side out. Topstitch
waistband lower neatened edge on joining seam and press ready waistband.
Topstitch belt loops on waistband.
10. Make a
buttonhole into right ends of waistband, and sew buttons on left end.