YOU NEED: denim; fusing; 1 zipper; 1
button.
IF THE PATTERNS HAVE DOUBLE CONTOUR,
THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM
ALLOWANCE IS NOT PROVIDED.
SEAM ALLOWANCE: 1 cm for all seams, 2 cm for hem.
ATTENTION! Before sewing, print paper patterns and lay them out
according to the linen width (from 90 to 150 cm) to find out how much material
you need (do not forget about double and symmetric details).
WHEN SEWING, BE
CAREFUL WITH NOTCHES – THEY MUST BE COINCIDING!
CUTTING:
Fabric:
1.
Waistband – 1 piece
2. Left
front part –1 piece
3. Right
front part – 1 piece
4. Side front panel – 2 pieces
5. Center back panel – 2 pieces
6. Side back panel – 2 pieces
7. Belt loop – 1 piece
8. Button catch – 1 piece
9. Side pocket – 2 pieces
10. Side pocket – 4 pieces
11. Pocket side part – 2 pieces
Fusing: flap,
waistband, button catch.
INSTRUCTIONS:
1. Apply the fusing to wring
side of flap, waistband, button catch.
2. Lay flap details right
sides together and overstitch along outer contour. Turn the flap right side out
through upper open edge. Make decorative stitch at 0.5 cm from flap edge.
3. Stitch
side seams of side front/side back parts and neaten them. Press the seam
backwards.
4. Mark pocket place on side part. Press inverted
pleat into pocket. Neaten pocket upper edge, fold it under and topstitch.
Stitch front pocket side part to pocket. Neaten joining seam. Trim pocket side
part upper edge, fold it under and topstitch at 1 cm from edge. Stitch pocket
side part to skirt side part.
5. Stitch front/back relieve seams so that pocket side
part enters the relieve seam. Neaten relieve seams and press it towards
front/back panels center. Make decorative stitch at 0.5 cm from relieve seam.
Fix side part and the pocket with vertical stitch.
6. Mark pocket place on front part. Topstitch pocket
according to marks. Fold the flap into right side and topstitch it at 0.5 cm
from topstitching.
7.
Stitch back panel middle edge. Neaten back panel middle seam and press it.
8. Neaten front panel middle edge.
Stitch front panel middle edge between closure notch and hem and press the
seam.
9. Press one-piece closure facing
into wrong side. Stitch the zipper under closure allowance (left edge). Stitch
zipper free braid to right one-piece facing. Fold button catch along the center
and overstitch it along two sides. Turn button catch right side out and press
it, neaten button catch side edge. Stitch button catch to closure left
allowance. Topstitch slit right edge (catch facing).
10.
Fold belt loop along the center wrong side out, adjust edges and overstitch at
0.5-0.7 cm from edges. Then turn it right side out, placing the seam or making
an edging of 0.1-0.2-cm width into wrong side, and press.
11.
Press the waistband along the center right side out. Neaten waistband lower
edge. Cut elastic braid according to size and topstitch on waistband at two
sides (from front/back belt loops level). Cut belt loops according to size and
topstitch them on waistband on marking. Stitch waistband raw edge to garment.
Overstitch waistband ends. Slash extra fabric and turn ends right side out.
Topstitch neatened edge on seam joining the waistband. Topstitch belt loops on
waistband upper edge.
12. Neaten garment hem, fold in into wrong side
and topstitch. Make buttonhole into waistband. Sew the button.